CE Certified High-Performance Surgical Bone Drills & Oscillating Saws
Manufactured by Jiangsu GMV Medical Device Co., Ltd. under strict quality controls. Engineered with steady torque, low noise, and minimal thermal necrosis for orthopedic surgical efficiency.
CE Certified
Verified Precision Mini Multifunctional K-Wire Collet Adapter Drill System
AO Standard AO Quick-Coupling Multi-Attachment Oscillating Saw System
High Torque High-Torque Large Bone Surgery Drill & Oscillating Saw Set
Ergonomic Grip Surgical Mini Bone Power Drill with Oscillating Saw Adapter
Cannulated Shaft Micro Cannulated Surgical Drill & Oscillating Saw System
Veterinary Specialty Orthopedic Power Drills & TPLO Radial Cut Saw System
Brushless Motor Brushless Multifunctional Surgical Handpiece & Micromotor
Technical Specifications & Operational Parameters
Standardized configurations tested for high torque retention, controlled temperature rise, and continuous autoclaving durability.
| System / Adapter Model | Primary Application | Speed / Oscillation Rate | Cannulation / Chuck Diameter | Sterilization Protocol |
|---|---|---|---|---|
| Multifunctional Bone Drill Handpiece | Trauma internal fixation, cortical screw pilot drilling | 0 – 1,100 rpm (stepless) | 0.5 – 6.0 mm (Jacobs / Keyless) | Autoclave 135°C, 0.22 MPa |
| Cannulated Drill Adapter | Interlocking intramedullary nail guide-pin insertion | 0 – 800 rpm (high torque) | Ø 4.5 mm cannulation | Autoclave 135°C, 0.22 MPa |
| Oscillating Sagittal Saw Adapter | Joint arthroplasty, osteotomy & bone resection | 0 – 15,000 cpm (oscillations) | Quick-lock blade collar (360° index) | Autoclave 135°C, 0.22 MPa |
| K-Wire / Pin Insertion Collet | Extremity fracture reduction, Kirschner wire pinning | 0 – 1,200 rpm | Ø 0.8 – 2.0 mm / Ø 2.0 – 3.2 mm | Autoclave 135°C, 0.22 MPa |
| Acetabular Reaming Adapter | Hip socket preparation & medullary reaming | 0 – 300 rpm (ultra-high torque) | AO / Stryker / Zimmer mount | Autoclave 135°C, 0.22 MPa |
| TPLO Radial Osteotomy Saw | Veterinary tibial plateau levelling osteotomy | 0 – 16,000 cpm | Radial semi-circular blade fixture | Autoclave 135°C, 0.22 MPa |
In-House Machining, Assembly & Quality Inspection
Every handpiece housing, gear train, and transmission shaft is produced and verified in-house at our Suzhou facility to guarantee micrometer-level concentricity and dependable surgical performance.
Frequently Asked Questions for Surgical Power Tools
What sterilization methods are recommended for GMV surgical power tools?
Handpieces, chucks, and adapters are engineered with medical-grade heat-resistant alloys and sealed motors, supporting standard steam autoclave sterilization up to 135°C (275°F). Batteries and battery transfer channels must follow designated aseptic containment protocols and low-temperature disinfection.
Can you provide custom chuck connections or AO quick-coupling adapters?
Yes. Jiangsu GMV Medical Device Co., Ltd. provides design-based customization and OEM/ODM manufacturing, including AO couplings, Jacobs chucks, K-wire collets, and cannulated shafts compatible with international surgical standards.
How does your factory ensure concentricity and motor durability?
Every batch undergoes dynamic balance calibration, precision runout inspection using optical projectors, torque testing, and continuous thermal load validation in our on-site testing facility.